| Nama merek: | PM |
|---|---|
| Kuantitas min Order: | 10 |
| Waktu pengiriman: | 1-25 hari kerja |
| Syarat-syarat pembayaran: | T / T |
| Menyediakan kemampuan: | 1000000PCS / bulan |
| Diameter: | 2-42mm | Panjangnya: | 310 / 330mm |
|---|---|---|---|
| Bersama%: | 9% | HRA: | 92.4 |
| Kekerasan HV30: | 1740 | Kepadatan (g / cm³): | 14.1 |
| Bahan: | Bahan | ||
| Cahaya Tinggi: | Hip Sintered Cemented Carbide Rod,H5 Cemented Carbide Rod,330mm Cemented Carbide Rod |
||
Bahan Tungsten untuk alat Pengeboran
Batang kami memiliki tingkat dan hak yang berbeda untuk digunakan pada aplikasi yang berbeda;Khususnya kami memproduksi Nano Grain carbide (Grain＜0.2µm);Batang kami dengan kekerasan tinggi dan ketahanan aus / korosi, semua produk dengan kualitas stabil;
l Dimensi: diameter dari 2-42mm, panjang 310/330mm;
l Gunakan untuk Finish milling
l Giling dengan toleransi h6/h5
Informasi Kelas
| Nilai | Bersama% | Ukuran Butir WC | Kekerasan |
Kekerasan |
Kepadatan | Kekuatan lentur | Patah Kekerasan |
Modulus Elastis | Koefisien dari Termal Ekspansi |
| HRA | HV30 | g/cm | MPa | IPK | MNm-3/2 | 0-6/ | |||
| ST25F | 9 | Sangat halus | 92.4 | 1740 | 14.1 | 5100 | 10 | 470 | 5.7 |
| Diameter | Panjang | ||||||||
| D(mm) | Toleransi | L(mm) | Toleransi | ||||||
| 3.0 | +0.2～+0.4 | 40 | +0,5～ + 1,0 | ||||||
| 3.0 | +0.2～+0.4 | 50 | +0,5～ + 1,0 | ||||||
| 3.0 | +0.2～+0.4 | 75 | +0,5～ + 1,0 | ||||||
| 3.0 | +0.2～+0.4 | 100 | +0,5～ + 1,0 | ||||||
| 4.0 | +0.2～+0.4 | 50 | +0,5～ + 1,0 | ||||||
| 4.0 | +0.2～+0.4 | 60 | +0,5～ + 1,0 | ||||||
| 4.0 | +0.2～+0.4 | 75 | +0,5～ + 1,0 | ||||||
| 4.0 | +0.2～+0.4 | 100 | +0,5～ + 1,0 | ||||||
| 5.0 | +0.2～+0.4 | 50 | +0,5～ + 1,0 | ||||||
| 5.0 | +0.2～+0.4 | 60 | +0,5～ + 1,0 | ||||||
| 5.0 | +0.2～+0.4 | 75 | +0,5～ + 1,0 | ||||||
| 5.0 | +0.2～+0.4 | 100 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 50 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 60 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 75 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 80 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 100 | +0,5～ + 1,0 | ||||||
| 6.0 | +0.2～+0.4 | 150 | +0,5～ + 1,0 | ||||||
| 8.0 | +0,3～ + 0,55 | 60 | +0,5～ + 1,0 | ||||||
| 8.0 | +0,3～ + 0,55 | 75 | +0,5～ + 1,0 | ||||||
| 8.0 | +0,3～ + 0,55 | 80 | +0,5～ + 1,0 | ||||||
| 8.0 | +0,3～ + 0,55 | 100 | +0,5～ + 1,0 | ||||||
| 8.0 | +0,3～ + 0,55 | 150 | +0,5～ + 1,0 | ||||||
| 10.0 | +0,3～ + 0,55 | 75 | +0,5～ + 1,0 | ||||||
| 10.0 | +0,3～ + 0,55 | 100 | +0,5～ + 1,0 | ||||||
| 10.0 | +0,3～ + 0,55 | 150 | +0,5～ + 1,0 | ||||||
| 12.0 | +0,3～ + 0,55 | 75 | +0,5～ + 1,0 | ||||||
| 12.0 | +0,3～ + 0,55 | 100 | +0,5～ + 1,0 | ||||||
| 12.0 | +0,3～ + 0,55 | 150 | +0,5～ + 1,0 | ||||||
| 14.0 | +0,3～+0,65 | 100 | +0,5～ + 1,0 | ||||||
| 14.0 | +0,3～+0,65 | 150 | +0,5～ + 1,0 | ||||||
| 16.0 | +0,3～+0,65 | 92 | +0,5～ + 1,0 | ||||||
| 16.0 | +0,3～+0,65 | 100 | +0,5～ + 1,0 | ||||||
| 16.0 | +0,3～+0,65 | 150 | +0,5～ + 1,0 | ||||||
| 18.0 | +0.4～+0.8 | 100 | +0,5～ + 1,0 | ||||||
| 18.0 | +0.4～+0.8 | 150 | +0,5～ + 1,0 | ||||||
| 20.0 | +0.4～+0.8 | 100 | +0,5～ + 1,0 | ||||||
| 20.0 | +0.4～+0.8 | 150 | +0,5～ + 1,0 | ||||||
